Canada Engineering

HomeServicesCanada Engineering

At 3P Tech Serv, we deliver specialist pressure equipment engineering services to manufacturers, fabricators, and OEMs operating in the Canadian market — providing accurate, code-compliant engineering support that meets the specific regulatory and technical requirements of Alberta and the broader Canadian oil and gas and process industries.

From Alberta pressure equipment design and Canadian ASME calculation services to oilfield equipment engineering services and oil and gas equipment design across Canada, our experienced engineering team provides well-documented, regulation-ready deliverables that give Canadian manufacturers and fabricators the technical engineering depth they need — without the cost and complexity of expanding their in-house team.
Pressure Equipment Engineering Canada

Our pressure equipment engineering services for the Canadian market cover the full mechanical design and calculation scope for pressure vessels, heat exchangers, pressure piping, and associated equipment designed and fabricated for operation in Canada. We work in accordance with ASME Boiler and Pressure Vessel Code requirements and the applicable Canadian provincial regulations — including the Alberta Boilers Safety Association (ABSA) and the Technical Standards and Safety Authority (TSSA) requirements in Ontario — ensuring that every piece of pressure equipment we engineer is compliant with the regulatory framework governing its province of operation. Our pressure equipment engineering Canada services are structured to support both new equipment design and the re-rating or fitness-for-service assessment of existing equipment already in service.

Oilfield Equipment Engineering Services

Our oilfield equipment engineering services are specifically tailored to the demanding technical and regulatory environment of the Canadian oil and gas sector — covering the design and engineering of separators, treaters, free water knockouts, glycol contactors, scrubbers, and other standard and custom oilfield process vessels. We are experienced in the specific design requirements of oilfield equipment for Canadian service — including sour service material requirements, cold temperature MDMT compliance, CRN registration support, and the documentation standards expected by Alberta and other provincial regulators. Our oilfield equipment engineering services are structured to support Canadian fabricators and OEMs from initial design through to final documentation package.

Alberta Pressure Equipment Design

Alberta is one of the most active pressure equipment markets in Canada, with a well-established regulatory framework governed by ABSA and the Safety Codes Act. Our Alberta pressure equipment design services are specifically structured to meet these requirements — covering design registration, Canadian Registration Number (CRN) application support, design calculations prepared to ASME and applicable Alberta standards, and documentation packages formatted to meet ABSA submission requirements. We work directly with Alberta-based fabricators and manufacturers to provide engineering support that is technically rigorous, provincially compliant, and structured to move smoothly through the ABSA review and registration process.

Canadian ASME Calculation Services

Our Canadian ASME calculation services provide pressure vessel and pressure equipment design calculations prepared in full accordance with the ASME Boiler and Pressure Vessel Code — the primary design standard referenced by provincial pressure equipment regulators across Canada. We perform ASME VIII Div 1 and Div 2 design calculations for pressure vessels, ASME B31.3 calculations for process piping, and ASME B31.1 calculations for power piping — producing clearly documented calculation packages that are structured to meet the expectations of Canadian provincial regulators and authorised inspection agencies. Our Canadian ASME calculation services cover new equipment design, re-rating calculations, and design verification for equipment already in fabrication or service.

Oil and Gas Equipment Design Canada

Our oil and gas equipment design services for the Canadian market cover the full engineering scope for process equipment used in upstream, midstream, and downstream oil and gas applications across Canada. We design and engineer production separators, pressure vessels, heat exchangers, skid-mounted process packages, and storage equipment for Canadian oil and gas service — applying the appropriate ASME codes, provincial regulatory requirements, and industry standards for Canadian oilfield and processing environments. Our oil and gas equipment design Canada services are delivered by engineers with direct experience in Canadian oil and gas projects, ensuring that the technical approach, material selection, and documentation are appropriate for the specific demands of the Canadian market — including cold climate design, sour service requirements, and CRN registration support.

Common questions

Frequently asked questions

Our pressure equipment engineering Canada services are structured to meet the regulatory requirements of the key Canadian provincial pressure equipment regulators — including ABSA in Alberta, TSSA in Ontario, and the equivalent bodies in other provinces. We prepare design calculations and documentation in accordance with ASME codes as referenced by Canadian provincial regulations, and we provide CRN application support to help fabricators and manufacturers navigate the provincial registration process efficiently. Our team is familiar with the specific documentation and submission requirements of each provincial regulator, reducing the risk of delays during the review and registration process.
A Canadian Registration Number (CRN) is a registration issued by a provincial pressure equipment regulator confirming that a pressure equipment design has been reviewed and accepted for use in that province. CRN registration is a mandatory requirement for most pressure vessels and pressure piping used in Canada, and obtaining it requires the submission of design drawings and calculations prepared to the applicable ASME codes and provincial standards. Our Alberta pressure equipment design services and Canadian ASME calculation services are specifically structured to produce CRN-ready documentation packages — helping our clients move through the registration process as efficiently as possible.
Our oilfield equipment engineering services for Canada cover a broad range of standard and custom process vessels used in upstream and midstream oil and gas applications — including two-phase and three-phase separators, free water knockouts, treaters, glycol contactors, fuel gas scrubbers, flare knockout drums, and pressure vessels for injection and disposal service. We design equipment for both sweet and sour service in accordance with ASME VIII Div 1 and applicable Canadian provincial requirements — including cold temperature MDMT compliance for Alberta and northern Canadian operating environments.
Cold temperature service is a critical design consideration for pressure equipment operating in Alberta and other Canadian provinces, where ambient temperatures can reach -40°C or lower during winter operation. Our Alberta pressure equipment design and Canadian ASME calculation services include rigorous pressure vessel MDMT calculations to ensure that the selected materials and wall thicknesses are not susceptible to brittle fracture at the minimum design metal temperature — a mandatory check under ASME VIII Div 1 and a specific focus area for ABSA during design registration review. We select materials appropriate for cold temperature service and document MDMT compliance clearly in our calculation packages.
Yes. Sour service is a common requirement for oil and gas equipment design in Canada, particularly in Alberta where hydrogen sulphide is present in many produced fluids. Our oilfield equipment engineering services include material selection and design documentation for equipment in sour service in accordance with NACE MR0175 / ISO 15156 — covering material hardness requirements, weld procedure considerations, and heat treatment requirements for sour service compliance. We incorporate sour service requirements into our Canadian ASME calculation services and design documentation from the outset, ensuring that the complete engineering package is consistent and compliant.
Canadian fabricators and OEMs choose 3P Tech Serv because we combine deep technical expertise in pressure equipment engineering with specific knowledge of the Canadian regulatory environment — delivering engineering output that is technically rigorous, provincially compliant, and structured to move efficiently through the CRN registration process. Our oil and gas equipment design Canada services give fabricators the engineering depth and bandwidth they need to take on more work and meet tighter deadlines — without the fixed costs of expanding their in-house engineering team. We work as a genuine engineering partner, not just a drawing office, bringing proactive technical input and clear communication to every project we support.
Connect with us

Get in Touch with Our Engineering Experts

Looking for reliable mechanical engineering design services or outsourcing support? Contact our team today to discuss your project requirements and get started.

  • K27, G Floor Rear Block, 9th Street, Ambattur Industrial Estate Chennai 600058 Tamilnadu India